Agilent HP 8590EM Series Quick Reference Guide free download

File name HP 8590EM Series Quick Reference Guide.pdf

Quick Reference Guide HP 8590 EM Series EMC Analyzer ABCDE HP Part No. 5963-2929 Printed in USA August 1995 Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and tness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Restricted Rights Legend. Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c) (1) (ii) of the Rights of Technical Data and Computer Software clause at DFARS 252.227-7013 for DOD agencies, and subparagraphs (c) (1) and (c) (2) of the Commercial Computer Software Restricted Rights clause at FAR 52.227-19 for other agencies. Copyright Hewlett-Packard Company 1995 c All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. 1400 Fountaingrove Parkway, Santa Rosa, CA 95403-1799, USA Introduction This guide provides a quick reference for experienced analyzer users. Chapter 1 summarizes the front-panel features, and tells how to make a basic measurement and how to perform the self-calibration routines. Chapter 2 contains brief descriptions of the EMC analyzer functions. Chapter 3 contains the remote programming commands. Appendixes A, B, C, and D contain helpful charts and tables. Appendix E contains diagrams of the key menus for the HP 8590 EM Series EMC analyzers. For additional instrument information, consult the HP 8590 EM Series EMC Analyzer User's Guide for your specic instrument. Guide Terms and Conventions The six keys along the right side of the display are called softkeys. Their labels are displayed on the screen. The softkeys appear in shaded boxes in this guide. An example of a softkey is REF LVL . The labeled keys that are on the front NNNNNNNNNNNNNNNNNNNNNNN panel of the analyzer are called front-panel keys. Pressing a front panel key changes the softkey labels or initiates functions. The front-panel keys appear in unshaded boxes in this guide. An example of a front-panel key is 4FREQUENCY5. Caution The input of the EMC analyzer can be damaged easily. When using a line impedance stabilization network (LISN) device with the EMC analyzer, disconnect the analyzer from the LISN device before changing either the switch position on, or the voltage to, the LISN device. iii NOTES iv Contents 1. Getting Acquainted with the EMC Analyzer Front-Panel Features . . . . . . . . . . . . . . . . . .